TUNDRA – Custom Series
TECHNICAL SPECIFICATIONS
Equipment Location
Details
Outside Dimensions:
Height:
Dry Weight:
Wet Weight:
Ground Pressure – FULL (lbs/ft2):
Water Capacity:
Heater(Watts):
Electrical Requirements North America
(A = actual / B = breaker):
240 Volts / 6 Gauge Wire
1 Pump / A32amp / B40amp
2 Pumps / A40amp / B50amp
3 Pumps / A40amp / B50amp
4 Pumps / A48amp / B60amp
115 Volts / 14 Gauge Wire
1 Pump / A12amp / B15amp
Dimensioned Drawings
How to Build Deck Access For a Hot Tub
Recommended Site Access and Preparation
CUSTOM SERIES WITH FOREVER FLOOR®
Most Spas Require 44” Clearance to get through gates, between houses and side fences and around corners. 9’-10’ of overhead clearance in order to move the spa into place.
To select a location for your new Arctic Spa with Forever Floor® will require a flat compact surface.
If you are using 4X4 railroad ties, they should be a maximum of 12-inch centers to properly support the entire underside of your spa.
Balconies and decks should be constructed to meet all builder codes and should be able to support up to exceed 100lbs/square foot. Remember that a gallon of water weighs roughly about 10 lbs
Your Spa can weigh as much a 1000lbs (454kg)
